Flocell XFM 5 & 10 – Modular Filtration System

Flocell XFM 5 & 10 – Modular Filtration System

Ultimate Flexibility & Efficiency with our Flocell XFM Modular Filtration Systems (Flocell XFM 5 – 5 lps flow rate | Flocell XFM 10 – 10 lps flow rate).

Designed to meet a wide range of flow rates and site requirements with ease, our containerised systems allow for straightforward installation without the need for extensive civil engineering, reducing setup time and expense.

Each system can be configured for gravity-fed or pump-fed operation, depending on site specifications and the nature of the materials being processed.

Built to maximise adaptability, these systems can be linked in series or parallel depending on flow rate, installation requirements and layout of the site. Additionally, to ensure seamless integration with your environment, each unit can be custom-painted to blend with its surroundings. Our water treatment systems are designed to provide unmatched flexibility and efficiency, offering a tailored solution that adapts to your project’s unique requirements.

Benefits

Solids removal – Over 90% solids removal on a single pass.

Advanced phosphate removal – Phosphate removal to less than 0.03 mg/litre.

Water & energy efficiency – Over 99.5% water efficient.

High-retention capacity – Up to 100x more than conventional filters.

Rapid installation – Site commissioning and switch-on within an hour of delivery and requires no civil engineering.

No moving parts – eliminate the need for short-term consumables and require minimal periodic servicing.

Low-cleaning frequency – typical cleaning cycles of only 30 minutes reduce site visits, labour and costs.

Concentrated sludge – Reduces volume and cost of sludge removal.

Cleaned by air – Energy and water efficient.

Features

FEATURES

Maximise Efficiency

Over 99.5% water efficient with a high solid-to-water removal ratio, each cycle lasts only 30 minutes saving time, labour, and costs.
Advanced phosphate removal to less than 0.03 mg/litre without supplemental chemicals, helping your operation stay compliant and environmentally conscious.
90% solid removal on a single pass ensuring cleaner output and optimal performance.

FEATURES

Rapid Deployment

Flocell offers a wide range of filters available at short notice for both duty and standby roles. Whether you need a temporary hire or a permanent installation, all our units are readily available at short notice.

FEATURES

Seamless Integration

Gravity or pump-fed, containerised XFM packaged solutions can be commissioned within one hour and require no civil engineering.

Typical cleaning cycles of only 30 minutes reduce site visits, labour and costs. No moving parts eliminate the need for short-term consumables and require minimal periodic servicing.

Specification

Model: Flocell XFM 10

General Overview

  • Filter Housing:  2x 1200mm diameter
  • Dimensions: Length: 10FT, Width: 8FT, Height: 9.6FT
  • Container Type: 10FT High Cube, ISO Certified
  • Maximum Operating Pressure: 2 bar
  • Flow Rates: Feed: 10 L/s, Sludge: 10 L/s
  • Total Liquid Volume: 2500 L

Key components & features

  • Weatherproof
  • Fully secure
  • Full side and end-opening
  • 4” / 110mm flange connections
    allow multiple units to be
    linked in series or parallel
  • PVC pipe & fittings
  • Weatherproof electrical inlet
  • 3 phase WIMES electrical panel
  • High-flow side channel blowers for cleaning
  • Pumped sludge removal
  • Vent fan
  • Specify in own brand RAL colour
  • No civils required for installation
  • Winterisation heater

 

Downloads

Flocell XFM Modular Filtration System Leaflet